Monolithic Joints

• Application
• Pipeline Isolation, Cathodic Protection, Oil & Gas, Water Supply, Petrochemical Industries

• Breakdown Voltage
• 15 kV

• Coating Type
• FBE (Fusion Bonded Epoxy), Polyurethane, or as required

• Color
• Black or as specified by client

• Density
• 7.85 Gram per cubic centimeter(g/cm3)

• Feature
• Double Sealing, Maintenance Free, Corrosion Resistant, Long Service Life

• Heat Conductivity
• Low, due to isolation design

• Installation Guideline
• Welded directly into pipeline; Ensure proper alignment and insulation gap

• Layer
• Single or Multiple as per design

• Material
• Carbon Steel, Stainless Steel

• Max Withstanding Temperature
• -40C to +120C

• Product Type
• Monolithic Isolation Joint

• Rated Voltage
• Up to 15 kV

• Size
• 2 to 48 (DN 50-DN 1200), custom sizes available

• Surface Treatment
• Fusion Bonded Epoxy or Polyurethane Coating

• Tensile Strength
• Up to 400 MPa (varies by material)

• Thermal Conductivity
• Low, for electrical isolation

• Thickness
• As per specification, commonly 12mm-60mm

• Width
• Custom as per pipeline

• Application
• Cathodic protection systems, gas/oil pipelines, water pipelines, and utility piping

• Breakdown Voltage
• >40 kV AC

• Coating Type
• Epoxy, Polyurethane, or other anti-corrosive coatings

• Color
• Black or as per customer specification (with external coating)

• Density
• 7.85 Gram per cubic centimeter(g/cm3)

• Feature
• Pre-assembled, leakproof, 100% electrically insulated, maintenance-free

• Heat Conductivity
• Low (designed for thermal isolation)

• Installation Guideline
• Install as per manufacturer recommendations between pipeline sections to break electrical continuity

• Layer
• Single-piece welded construction with internal insulating layer

• Material
• Carbon Steel, Stainless Steel, or Alloy Steel with High-Quality Insulating Materials

• Max Withstanding Temperature
• -40C to +120C (up to +150C on request)

• Product Type
• Monolithic Insulating Joint

• Rated Voltage
• Up to 40 kV or as required

• Size
• DN15 to DN2000 or as per requirement

• Surface Treatment
• Epoxy coated, fusion bonded epoxy, or polyurethane coating

• Tensile Strength
• Typically >415 MPa for steel body

• Thermal Conductivity
• Low for insulation purposes

• Thickness
• Flange thickness varies by pressure rating (Standard: ANSI/ASME flanges)

• Width
• Customizable as per pipeline diameter

• Application
• Oil, Gas, Water, and Petrochemical Pipelines

• Breakdown Voltage
• >25 kV

• Coating Type
• Epoxy / Polyurethane or as specified

• Color
• Black (External Coating)

• Density
• 7.85 Gram per cubic centimeter(g/cm3)

• Feature
• 100% factory tested, maintenance-free, full isolation and sealing

• Heat Conductivity
• 15-60 W/mK (depends on material)

• Installation Guideline
• Install as per standard pipe fitting procedures ensuring directional flow and coating integrity

• Layer
• Single or multi-layered construction based on requirement

• Material
• Carbon Steel / Stainless Steel / Alloy Steel

• Max Withstanding Temperature
• -20C to +120C

• Product Type
• Monolithic Isolation Joint

• Rated Voltage
• Up to 10 kV

• Size
• 1 to 48 (DN25 - DN1200) or as requested

• Surface Treatment
• Fusion Bonded Epoxy (FBE) / Polyurethane

• Tensile Strength
• 415 MPa (for Carbon Steel)

• Thermal Conductivity
• Varies according to material, typically 15-60 W/mK

• Thickness
• Custom engineered per design

• Width
• As per customers specification